CC3600H-2
Series
1/3-INCH, HIGH RESOLUTION, ENHANCED
SENSITIVITY, 480 TVL (NTSC/PAL)

REAR COVER REMOVED
(LENS
& MOUNT NOT SUPPLIED WITH CAMERA)
|
-
Sony EXview HAD™ Technology
- Compact
Body Style, Shorter Length Than Most Full-Featured CCD Cameras
- 1/3-Inch
Format CCD Imager
- C/CS
Lens Mount
- DC/Video
Drive Auto Iris Lens Compatibility
- 24V
AC/DC Power
- Line
Lock With Phase Adjust
- Four
White Balance Modes
- Automatic
Gain Control (AGC)
- Selectable
Gamma
- Backlight
Compensation
- Electronic
Iris
- Horizontal
Resolution of 480 TV Lines
- Digital
Signal Processing
- Removable
Low Profile Top/Bottom Mount
- Optional
Integral Feedthrough Mount
|
The
CC3600H-2 digital color camera is smaller than most other
full-featured CCD cameras. In order to keep the camera as small
as possible, Pelco engineers designed the camera components to fit
within the external dimensions of the unit. Since the BNC, power
and lens connectors stay within the boundaries of the case the compact
camera and a lens fit perfectly inside one of Pelco’s smaller
enclosures (EH100, EH3508, EH2508, EH2020, EH2100 and EH2200). Pelco
also has a wide selection of fixed and varifocal lenses available
for the CC3600H-2 to meet your installation requirements.
The
CC3600H-2 is a high-resolution digital camera with greater
light sensitivity at 0.3 lux. The features of the camera include
color balance settings, gamma level adjustment, automatic gain control,
digital signal processing for automatic backlight compensation and
line lock. To adjust one of these many fine-tuning picture modes,
just reset the DIP switch setting on the side of the camera.
The
CC3600H-2 digital color camera also includes a 1/3-inch imager,
accepts DC and video drive auto iris lenses, and has adjustable
back focus to accommodate C or CS lenses. Back focus adjustment
is easy with the lockable thumb wheel, accessible from the top or
bottom of the camera.
The
CC3600H-2 digital camera is quick and easy to install and
its distinctive design is ideal for use in confined spaces. The
camera has a quick-connect power connection, BNC video connector,
and a removable mount adapter for top or bottom mounting.
Accessories
include the PCM100, a Pelco camera mount designed specifically
for the CC3600H-2. This adjustable, well-designed mount has no exposed
cabling or hardware. All cables are integrated in the unit making
installation quick and easy. The PCM100 can be installed directly
to a wall, ceiling or adapted to a standard 2 x 4-inch (5.08 cm
x 10.16 cm) electrical box.
|